DAC50S
Characteristics
{- Typ 2 Überspannungsschutz}
- 10 years warranty
{- Sichere Stennvorrichtung}
{- Steckbares Schutzmodul}
- remote signaling
- remote signaling
{- Zugelassen nach UL1449 ed.5}
SPD type
T2
Nominal discharge surge current (8/20)
20 kA
max. discharge current (Imax)
50 kA
Response time [ta]
<20 ns
Voltage protection level [Up]
1.25 kV
Nominal cross section conductor (min/max)
2.5 - 25.0 mm²
Nominal frequency [fn]
0.0 - 100.0 Hz
Nominal line voltage Un AC
230 V
Discharge current max. (8/20) µs [Imax]
50 kA
Operating current [Ic]
0 kA
Fault indication
mechanisch, Rot
Follow current [IF]
0 kA
follow current extinguishing capability [Ifi]
Unendlich kA eff
Short circuit resistance (Icw)
50 kA
Protection level max. (at Imax)
1.25 kV
Temperature range
-40.0 - 85.0 °C
TOV-voltage L-N [UT]
335 V / 5 sec.
Connection cross section solid / stranded max.
1.5 mm²
Exhausting
No
Remote signalling
Yes
Material housing
Integrated backup fuse
No
Mounting on
Hutschiene 35 mm
Mounting method
DIN rail (top hat rail) 35 mm
Yes
System configuration
Switching capacity signaling contact
250 V/0,5 A (AC) / 30 V / 3 A (DC)
Degree of protection
IP 20
Degree of protection (IP)
IP20
Signaling on the device
Optic
Fuse max. (gG)
125 A
Continuous voltage AC max.
275 V
Test standards Germany
DIN EN 61643-11
Test standards Europe
DIN EN 61643-11
Test standards International
IEC 61643-11
Test standards USA
UL 1449 ed.4
Test standards France
DIN EN 61643-11
Homologation
KEMA / EAC
![Response time [ta]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub47%2F17b59c00a5a65f78.jpg)
![Voltage protection level [Up]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub178%2F17b59c335bb80578.jpg)
![Nominal frequency [fn]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub178%2F17b59c385e82d278.jpg)
